Q.series
Gantner Instruments GmbH
133
5 Configuration
5.10.2 Firmware update for modules
Install as required the latest version of ICP 100 or test.com-
mander so that you can also install the l
atest version of the firm-
ware on your PC.
Procedure 1. In the program test.commander select Utilities > Module
firmware update.
2. Make sure that the settings with regard to the interface used
are corr
ect: Options > Communication settings.
3. Search for the Test Controller or the modules: Find mo
dules.
4. If the modules are connected via a Test Controller, in the next
window mark the
Test Controller to which the modules to be
updated are connected and click on OK.
To Next Page
Loading...
