GE Voluson E6

GE HEALTHCAREDRAFT VOLUSON E8 / VOLUSON E6
D
IRECTION KTD102576, REVISION 7 DRAFT (AUGUST 23, 2012) SERVICE MANUAL
Chapter 5 - Components and Functions (Theory) 5-37
Section 5-5
Internal I/O
Internal In/Out connections depend on:
• system type (Voluson E6 or Voluson E8)
• the currently installed PC Motherboard and
• the BT-version (BT09, BT10, BT12 or BT13)
NOTE: The “Mainboard type” can be read out in the System Setup - Administration - SYSTEM INFO page
(see: Figure 7-1 on page 7-3).
• Voluson E6 (BT09):
-“Kontron Dual-core” PC Motherboard is installed, see: Figure 5-14 on page 5-38.
-“DFI Dual-core” PC Motherboard is installed, see: Figure 5-15 on page 5-39.
• Voluson E6 (BT10):
-“Kontron Dual-core” PC Motherboard is installed, see: Figure 5-16 on page 5-40.
-“DFI Dual-core” PC Motherboard is installed, see: Figure 5-17 on page 5-41.
• Voluson E8 (BT09):
-“Kontron Dual-core” PC Motherboard is installed, see: Figure 5-18 on page 5-42.
-“DFI Dual-core” PC Motherboard is installed, see: Figure 5-19 on page 5-43.
• Voluson E8 (BT10):
-“Kontron Dual-core” PC Motherboard is installed, see: Figure 5-20 on page 5-44.
-“DFI Dual-core” PC Motherboard is installed, see: Figure 5-21 on page 5-45.
• Voluson E8 / Voluson E6 (BT12/BT13):
-“Advantech Dual-core” PC Motherboard is installed, see: Figure 5-22 on page 5-46.
-“DFI Dual-core” PC Motherboard is installed, see: Figure 5-23 on page 5-47.