GE Voluson E6

GE HEALTHCARERAFT VOLUSON E8 / VOLUSON E6
D
IRECTION KTD102576, REVISION 7 DRAFT (AUGUST 23, 2012) SERVICE MANUAL
7-38 Section 7-9 - Error Messages
IBegrenzer.cpp CWshots no TxPulseEntrys.
Action: restart the system, If after restart not ok then call technical support
restart the system
IBegrenzer.cpp MCshots no TxPulseEntrys.
Action: restart the system, If after restart not ok then call technical support
restart the system
IBegrenzer.cpp Mshots no TxPulseEntrys.
Action: restart the system, If after restart not ok then call technical support
restart the system
IBegrenzer.cpp Mshots TxMultiFocus problem restart the system
IBegrenzer.cpp PWshots no TxPulseEntrys.
Action: restart the system, If after restart not ok then call technical support
restart the system
In the 3D Image Measure is not allowed change to another format than 3D Fullscreen mode
Incorrect ReplayCtrl-Object restart the system
incorrect VersionByte, xx of xx cycles OK contact technical support
iPWCW_CloseProcessing in RT_PWorCWFilterBlock::execute() returned error
code xx !! Action: restart the system, If after restart not ok then call technical support
restart the system
iPWCW_InitializeProcessing in RT_PWorCWFilterBlock::execute() returned error
code xx !! Action: restart the system, If after restart not ok then call technical support
restart the system
iSetVideoSource(eVideoExtern) function fails restart the system
iSetVideoSource(eVideoIntern) function fails. Action: reboot the system reboot the system
iSetVideoSource(eVideoIntern) function fails
Action: The system will restart itself by pressing OK
press OK
LineFilt Out Of Range press ok and save this user-setting once again
Loading DVD data..... Requested operation could not be executed!
Try again after DVD data is loaded.
Press ok, wait until loading process is finished and try
again
LP_KoefBlock: SamplePRF too big restart the system
M_Gain Out Of Range press ok and save this user-setting once again
M_Reject Out Of Range press ok and save this user-setting once again
MC Ensemble Out Of Range press ok and save this user-setting once again
MC_Balance Out Of Range press ok and save this user-setting once again
MC_BaseLinePos Out Of Range press ok and save this user-setting once again
MC_Dynamic Out Of Range press ok and save this user-setting once again
MC_FallSmooth Out Of Range press ok and save this user-setting once again
MC_Gain Out Of Range press ok and save this user-setting once again
MC_RiseSmooth Out Of Range press ok and save this user-setting once again
MCShotBuffer : not enough memory reserved" ". Action: restart the system restart the system
M-DynContrast Out Of Range press ok and save this user-setting once again
memory allocation error Action: restart the system restart the system
Error Messages Actions