GE Voluson E6

GE HEALTHCAREDRAFT VOLUSON E8 / VOLUSON E6
D
IRECTION KTD102576, REVISION 7 DRAFT (AUGUST 23, 2012) SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-39
Memory allocation failed Action: restart system restart the system
MessageBox(NULL, err_msg, "CVIE ERROR", MB_OK); restart the system
missing BCMCPW_TxFocusData Action: restart the system restart the system
missing BM_TxFocusData Action: restart the system restart the system
missing CW_TxFocusData Action: restart the system restart the system
missing ProbeAcousticUnit, wrong ProbeAcousticUnitID. Action: restart the system restart the system
missing ProbeGeneral data - wrong ProbeID. Action: restart the system restart the system
missing ProbeScanFunc - wrong ProbeScanFuncID. Action: restart the system restart the system
Mode not implemented now restart the system
MotionColor-DSC 1st:Memory allocation failed restart the system
MotionColor-DSC 2nd:Memory allocation failed restart the system
Motion-DSC:Memory allocation failed restart the system
No Cassette in drive! Put cassette into drive of VCR. Put cassette into the VCR
No CD Writer found
check the connection and the Power cable - plug the cable
off and on and try again. (restart the system)
No default settings available - use "Edit Settings" to set the Default Settings! select a printer
No disc or device not ready!
insert disk, if fails again reboot and try again (with another
disk)
No DVD in drive! Put DVD into drive of recorder. Put DVD into drive
no PCI Interface restart the system
No Printer selected! select a printer
Not enough space. (Not enough space on destination to hold the backup data.) select another destination to save Full Backup
overview window creation failed. Action: restart the system restart the system
Password contains invalid characters. Allowed characters are A..Z, a..z, 0..9 and . Enter password without invalid characters
Password is too short. Minimum 6 characters. Enter password with at least 6 characters
Password must contain at least 2 non-letter characters, 0..9 or Enter password with minimum 2 non-letter characters
Persistance Out Of Range press ok and save this user-setting once again
Persistence coeff page index too big restart the system
pGetActualUnitBuffer failed, RepresentationManager is not initialized restart the system
Please plug off and on probe and try again
plug of and on the probe and try again, plug it on a different
probe connector.
Please plug off and on probe and try again. Plug it on a different probe connector see error message, connect another probe
pNextUnitCompleted failed, RepresentationManager is not initialized restart the system
Error Messages Actions