GeoVision GV-AS1010 User Manual

GV-AS410 / 4110 / 810 / 8110 Controller
103
5
5.2.6 Connecting the PC
Connecting GV-AS410 / 4110 / 810 / 8110 to a computer allows you to access its Web
interface and connect it to GV-ASManager if the computer is installed with GV-ASManager.
The computer running GV-ASManager software can be used to monitor the access
information and alarm messages from GV-AS410 / 4110 / 810 / 8110. If connection with GV-
ASManager is interrupted, GV-AS410 / 4110 / 810 / 8110 stores this information on the
supplied micro SD card. The data stored will be sent to GV-ASManager when connection
resumes.
Network
PC
GV-AS410 / 4110 /
810 / 8110
Micro SD
Ethernet
GND
IN16
IN15
GND
IN14
IN13
Figure 5-8
Note: GV-AS410 / 810 is only compatible with GV-ASManager V4.2.1 or later, and GV-
AS4110 / 8110 is only compatible with GV-ASManager V4.2.3 or later.

GeoVision GV-AS1010 Specifications

General

Brand	GeoVision
Model	GV-AS1010
Category	Controller
Language	English