GeoVision GV-AS1010 User Manual

132
7.2.2 Connection over Internet
DDNS (Dynamic Domain Name System) provides another way of accessing GV-AS / GV-EV
Controller when using a dynamic IP. DDNS assigns a domain name to the controller, so the
GV-ASManager can always access the controller by using the domain name.
To enable the DDNS function, you should first apply for a domain name from the website of
the DDNS service provider. There are 2 providers listed in the controller: GeoVision DDNS
(V2) and DynDNS.org. To register at the GeoVision DDNS Server, see the following
instructions. For details on DynDNS, please consult them at www.dyndns.org
.
Figure 7-7
Registering a DDNS Domain Name
Not
e that the interface may vary slightly for GeoVision DDNS Server V1 and V2. To obtain a
domain name from the GeoVision DDNS Server:
1. Click the GeoVision DDNS button on the Network Configuration page (Figure 7-5). Or
open an Internet browser, and type the Web address
http://ns.dipmap.com/register.aspx
. This page appears.
Figure 7-8

GeoVision GV-AS1010 Specifications

General

Brand	GeoVision
Model	GV-AS1010
Category	Controller
Language	English