14
1.2.4 Connecting the PC
Connecting GV-AS110 / 1110 to a computer allows you to access its Web interface and
connect it to GV-ASManager if the computer is installed with GV-ASManager. GV-
ASManager software can monitor the access information and alarm messages from GV-
AS100 / 1010. The communication link between the computer and GV-AS100 / 1010 is as
below.
GV-AS100: RS-485 connection or network connection
RS-485 connection: a RS-485 to RS-232 converter is required
Network connection: an optional GV-ASBox or GV-ASNet is required
GV-AS1010: Network connection
IMPORTANT: To enable connection to PC on GV-AS100, Switch 1 must be turned on. See
1.2.4.C Switches.
To Next Page
Loading...
Need help?
General
