GeoVision GV-AS1010 User Manual

180
9.1.4.G Other Settings
The figure below shows the location of the Web Setting Switch, Reset Button and Default
Button.
Default
Reset EN
Figure 9-8
9.1.4.G.a Web Setting Switch
When the Web Setting switch is set to ON, you can modify Advanced Settings of GV-
AS100, GV-AS110 and GV-AS120 through the Web interface. When the switch is set to
OFF, Advanced Settings are not accessible. For details on Advanced Settings, see 9.3.2
Advanced Settings.
9.1.4.G.b Resetting the GV-ASBox
To reset GV-ASBox, press the Reset EN button on GV-ASBox for 3 seconds.
9.1.4.G.c Restoring Factory Defaults
To restore factory default values, press the Default button on GV-ASBox for 3 seconds. After
this it may take up to 3 minutes to restore GV-ASBox to default values.

GeoVision GV-AS1010 Specifications

General

Brand	GeoVision
Model	GV-AS1010
Category	Controller
Language	English