GV-AS100 / 1010 Controller
25
1
1.3.2.B Deleting a Card
GV-AS100
1. Press the code ＊227 (＊CAR).
2. Present the Master Card and enter its PIN code. The LCD displays Add New Card.
3. Press 0. The LCD displays Del Card Data.
4. Press #. The LCD displays Enter Del Card.
5. You can either press the card number or present the card to the unit.
The LCD displays: Delete, 1. Yes? 2. No?.
6. Press 1 to save and exit.
GV-AS1010
1. Present the Delete Card and enter its PIN code. The LCD displays Enter Del Card.
2. You can either press the card number or present the card to the unit.
The LCD displays: Delete, 1. Yes? 2. No?.
3. Press 1 to save and exit.
1.3.3 Resetting the APB Function
You can reset the anti-passback (APB) function of a card to allow a user to re-access the
entry or exit reader.
1. Press the code ＊227 (＊CAR).
2. Present the Master Card or Enroll/Delete Card, and enter its PIN code. The LCD
displays Add New Card.
3. Press 0 several times. The LCD displays Reset Card’s APB.
4. Press #. The LCD displays Enter Card.
5. You can either press the card number or present the card to the unit.
The LCD displays: Reset, 1. Yes? 2. No?.
6. Press 1 to save and exit.
To Next Page
Loading...
Need help?
General
