18
1.2.6 Fitting the Battery
GV-AS100 / 1010 includes a battery, providing power to GV-AS100 / 1010 settings and real-
time clock circuitry. When the power in the battery becomes low, the message “Low Battery”
will appear on GV-AS100 / 1010 LCD. In this case, replace the battery. All settings on GV-
AS100 / 1010 will disappear about 10 hours after the battery stops working, and GV-AS100 /
1010 will be restored to default settings.
GV-AS100 GV-AS1010
Figure 1-14
Note:
1. Make sure the plastic insulation film under the battery is removed.
2. It is recommended to replace the battery annually. GV-AS100 uses a 3V lithium
battery that can be purchased on your own. For GV-AS1010, contact your sales
representative to acquire replacement batteries designated for GV-AS1010.
To Next Page
Loading...
Need help?
General
