GeoVision GV-AS1010 User Manual

GV-EV48 Controller
115
=
6.1 Introduction
GV-EV48 is an elevator controller designed to control access of 1 elevator with a maximum
of 48 floors. Up to 2 GV-Readers / GV-GF Fingerprint Readers can be connected to GV-
EV48 using RS-485 connection and network connection. GV-EV48 can recognize
identification cards and grant access to the authorized floors only.
6.1.1 Main Features
 Grant access to specific elevator floors using access cards, card’s PIN code or
fingerprints
 GV-EV48 – 24 Floors: Built-in 24 relay outputs to support up to 24 elevator floors
 GV-EV48 – 48 Floors: Built-in 48 relay outputs to support up to 48 elevator floors
 Support up to 2 GV-Readers / GV-GF Fingerprint Readers through network connection
and RS-485 connection
6.1.2 Packing List
 GV-EV48 – 24 Floors / 48 Floors
 Power Adaptor 12V DC / 3A
 Power Cord
 Battery Cable
 Screw x 8
 Hex Nut x 8
 Hex Pillar x 8
 Micro SD Card 2 GB
 Software CD
 Warranty Card

GeoVision GV-AS1010 Specifications

General

Brand	GeoVision
Model	GV-AS1010
Category	Controller
Language	English