xi
Optional Devices
Optional devices can expand the capabilities and versatilities of your GV-AS / GV-EV
Controllers. Consult your sales representative for more information.
GV-Reader
1251
GV-Reader 1251 is a card reader that uses a 125 kHz frequency. It has
both Wiegand and RS-485 outputs that can be connected to any standard
access control panel.
GV-RK1352
GV-RK1352 is a card reader with keypad that uses a 13.56 MHz
frequency. The reader has both Wiegand and RS-485 outputs that can be
connected to any standard access control panel.
GV-R1352
GV-R1352 is a card reader that uses a 13.56 MHz frequency. The reader
has both Wiegand and RS-485 outputs that can be connected to any
standard access control panel.
GV-GF
Fingerprint
Reader
Fingerprints can be enrolled locally or remotely using a GV-GF1921 / 1922
Fingerprint Reader through TCP/IP connection with GV-ASManager.
For local fingerprint enrollment, the user needs to register his or her
fingerprints onsite using a reader connected with GV-ASManager. For
remote fingerprint enrollment, empty fingerprints can be created on the
GV-ASManager first, and the user can register his or her fingerprints later
at a GV-GF1921 / 1922 with the assigned card.
GV-FR
Face
Recognition
Reader
The reader supports two operation modes: Face Recognition or Card. In
Face Recognition mode, GV-ASManager synchronizes the faces enrolled
from the reader for access controller. In Card mode, the users need to
present their cards to be granted access.
GV-CR420
GV-CR420 is a card reader with a built-in 4MP wide angle IP camera. The
card reader recognizes identification cards and transmits live view through
network connection.
GV-DFR1352
The GV-DFR1352 is a card reader designed to be installed on the door
frame for recognizing identification cards. Featured with the Wiegand and
RS-485 outputs, the unit can be connected to any standard access control
panel.
GV-ASBox
Only works with GV-AS100 / 110 / 120. The device can add Network
function, 1 Wiegand interface, 8 additional inputs and outputs to GV-
AS100, GV-AS110 and GV-AS120.
GV-ASNet
Only works with GV-AS100 / 110 / 120. This device can add Network
function to GV-AS100, GV-AS110 and GV-AS120.