26
1.3.4 Accessing the Security Mode
The security mode is used to arm GV-AS100 / 1010. In the arm mode, no cards can be
granted access and no one can program the unit. Only the security card that is associated
with a PIN code can be used to disarm the unit.
1.3.4.A Enabling the Security Mode
Before you can access the security mode, you need to create a security card first.
1. To create a security card, follow the steps 1 to 4 in 1.3.2.A Adding a Card, select 4)S as
card type and create a PIN code for the security card.
2. To access security mode, press the code *276 (*ARM).
The LCD displays Start Arm? Enter PIN Code.
3. Press the PIN code of the security card.
The LCD displays Start Arm? Enter Security Card.
4. Present the security card. The security mode is enabled.
1.3.4.B Disabling the Security Mode
To disable the security mode, press any key, enter the PIN code of the security card and
present the security card.