2
1.1 Introduction
GV-AS100 / 1010 is a single door controller with a built-in a card reader and a LCD display.
You can connect one more card reader to GV-AS100, and up to two more card readers to
GV-AS1010 for entry and exit applications. GV-AS100 / 1010 has the capability to store up
to one thousand cards as a standalone model and up to 40,000 cards when connected to
GV-ASManager. The programming is either done on the keypad or from the software GV-
ASManager.
GV-AS100 / 1010 is suitable for controlling doors, parking gates and access to elevator call
buttons.
GV-AS100
IN
Wiegand / RS-485
Reader
OUT
Door
RS-485
GV-HUB /
GV-COM /
GV-NET/IO Card
RS-232
GV-ASManager
Figure 1-1
To Next Page
Loading...
Need help?
General
