128
2. Type the default value admin for both User name and Password, and click OK. This
page appears.
Figure 7-3
3. In the DHCP Client section, click Disable. Type the static IP address information,
including IP Address, Subnet Mask, Default Gateway and Domain Name Server.
4. Click Submit. When the setting is complete, the Status field will indicate Register
Success. Then GV-AS / GV-EV Controller can be accessed with this fixed IP address.
Note: If you like to use the domain name instead of IP address, you may use Domain
Name Service as well. For details on domain name service, see 7.2 DHCP Connection.
To Next Page
Loading...
Need help?
General
