EasyManuals Logo

GeoVision GV-AS1010 User Manual

GeoVision GV-AS1010
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
134
Configuring the GV-AS / GV-EV Controller on Internet
After acquiring a domain name from the DDNS Server, you need to configure the registered
domain name on the controller to access the controller by the domain name on Internet.
1. Open an Internet browser, and type the default IP address https://192.168.0.100
. The
login dialog box (Figure 7-2) appears.
2. In the User Name and Password fields, type default value admin and admin
respectively. Click OK. The Network Configuration page (Figure 7-10) appears.
3. Click Enable, and select Send to DDNS.
4. Type Host Name, User Name and Password that are registered on the DDNS Server. If
you select GeoVision DDNS, the system will automatically bring up the Host Name.
Figure 7-10
5. Click Submit. When the setting is complete, the Status field will indicate: Register
Success. Then GV-AS / GV-EV Controller can be accessed with the domain name.

Table of Contents

Other manuals for GeoVision GV-AS1010

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GeoVision GV-AS1010 and is the answer not in the manual?

GeoVision GV-AS1010 Specifications

General IconGeneral
BrandGeoVision
ModelGV-AS1010
CategoryController
LanguageEnglish

Related product manuals