Creating the Digital Image 119
Figure 5-32 Color correction. After clicking on the color picker icon (1) in the tool tab you click
on the desired tone on the color wheel where a point (2) will appear. You can now adjust
hue, saturation and lightness either by moving the slides (3) or clicking on the point on the
wheel and dragging it to form an arrow (4) that can be extended shortened or rotated to
alter the settings. You can also create a new point (5) to rotate the whole segment within the
circle. Saturation and vibrancy are altered with sliders (6).
Figure 5-33 Curves. Clicking on a new point creates a gravity point which pulls the curve
towards itself. You need not click on the actual curve.
To Next Page
Loading...
