To Next Page
L
Lee BowersSep 18, 2025
What does no flip module mean on HID HDP5000?
- AAndre RomeroSep 19, 2025
Verify the HID Printer has flipper capabilities via the LCD Menu, if two-sided job sent to a one-sided Printer.
What does no flip module mean on HID HDP5000?
Verify the HID Printer has flipper capabilities via the LCD Menu, if two-sided job sent to a one-sided Printer.
What does no iclass encoder mean on HID Printer?
If you are trying to send encoding data, but the HID Printer is not configured with this encoder type, you are trying to send encoding data, but the Printer is not configured with this Encoder type.
What does no mag module mean on HID HDP5000 Printer?
If MAG encoding job sent to printer without a MAG encoder on your HID Printer, you are trying to send encoding data, but the Printer is not configured with this Encoder type.
Why is my HID HDP5000 waiting for data?
If the printer has stopped receiving data from the PC, reset the HID Printer and try again.
What to do if wrong film on HID Printer?
If the print film installed in the HID Printer does not match the film type selected in the printer driver, replace film in printer with type specified in the driver.
What to do if wrong ribbon on HID HDP5000?
If the print ribbon installed in the HID Printer does not match the ribbon type selected in the printer driver, replace ribbon in printer with type specified in the driver.
What does no mifare encoder mean on HID Printer?
To cancel, click on Cancel Print, if you are trying to send encoding data, but the HID Printer is not configured with this encoder type.
What does no prox encoder mean on HID HDP5000?
To cancel, click on Cancel Print, if you are trying to send encoding data, but the HID Printer is not configured with this encoder type.
What does no smart encoder mean on HID Printer?
To cancel, click on Cancel Print, if no smart card encoder is installed in the HID printer.
What to do if printing error on HID HDP5000 Printer?
If an error was detected during printing on your HID Printer, reset the printer and try again. If this problem persists, call for technical assistance.
Describes the step-by-step process of the HDP5000 printer's operation.
Details the sequence of operations for a dual-sided, full-color print job with magnetic encoding.
Explains the sequence of operations for the Lamination Module after printing.
Critical instructions and warnings for safe printer operation and handling.
Lists the certifications and standards the printer complies with, such as CSA, FCC, and UL.
Specifies the range of card thicknesses supported for printing and lamination.
Provides the physical dimensions of the printer and its modules in inches and millimeters.
Details the print speed in seconds per card and cards per hour for various print configurations.
Explains the print method for sharp black text and barcodes using resin-based ink.
Describes the Printhead as the component that performs the actual printing and its fragility.
Details the two-line, 32-character LCD display used for printer status and softkey functions.
Explains the function of the two softkey buttons below the LCD, which change based on printer mode.
Lists accepted card types like UltraCard, PVC, PET, Proximity, and Magnetic Stripe cards.
Specifies standard CR80 card size and printing recommendations for card surfaces and design.
Describes the card cartridge capacity and its role in loading blank cards.
Details the capacity of the card output hopper and its functionality with a flipper module.
Explains that both the printer and its software driver control the built-in transfer roller.
Guides on adjusting the transfer roller temperature via the Printer Driver setup.
Discusses the types of overlaminates accepted, including their thickness and durability.
Explains the availability of clear, holographic, and custom designs for overlaminates.
Instructions for inspecting the printer carton for damage and ensuring all accessories are included.
Guidelines for selecting a suitable location with adequate air circulation and avoiding environmental hazards.
Step-by-step instructions for loading the print ribbon into the printer cartridge.
Detailed steps for loading the HDP transfer film into the film cartridge.
Instructions for loading blank cards into the card cartridge, specifying orientation.
Explains dye-sublimation as a method for smooth, continuous-tone images using dye-based ribbons.
Describes resin thermal transfer for sharp text and barcodes using resin-based ink.
Crucial safety information regarding electrostatic discharge and general handling precautions.
Overview of the HDP500 printer driver settings and available options.
Explains how to configure card size, type, and orientation within the printer driver.
Details the options for selecting CR-80 or custom card sizes, including print area dimensions.
Guides on choosing the appropriate card stock type from a list of supported options.
Describes the function for automatically detecting installed ribbons, film, and laminates.
Instructions for matching the Ribbon Type selection to the ribbon loaded in the printer.
Explains the functions for dual-sided printing, including printing both sides and specific panel splits.
Details how to control image properties like sharpness, contrast, gamma, and color balance.
Explains how to use the Advanced Image Color window for fine-tuning image appearance.
Guides on adjusting the horizontal and vertical position of the printed image on the card.
Explains how to control the speed and temperature for transferring images from film to card.
Describes how to specify the magnetic encoding standard to use (ISO, Custom, Raw Binary, JIS II).
Guides on selecting coercivity levels and magnetic tracks for encoding cards.
Details how to adjust the horizontal position of the overlaminate on the card.
Covers adjusting the lamination dwell time and selecting the type of lamination material used.
Explains how to set custom card sizes and define specific print areas for the K Panel.
Describes options for printing black ink with YMC panels or only black ink on specific backgrounds.
Provides information on the installed ribbon, HDP film, and laminate levels detected by the printer.
Instructions on how to use the security lock slot to prevent unauthorized removal of the printer.
Step-by-step guide for installing the optional Flipper Module accessory to the printer.
Troubleshooting tables that list LCD and printer error messages, their causes, and solutions.
Lists the necessary system requirements for using the Ethernet option, including network and PC specifications.
Describes network services like Print Server, Web Page Server, and Telnet Server for printer management.
Describes how to initiate a Telnet session for network administration and printer commands.
Provides an overview of the card lamination module and its capabilities for applying overlaminates.
Step-by-step guide for installing the lamination module and its driver software.
Instructions on how to adjust the card flattener to fine-tune the flatness of laminated cards.
Discusses optimizing HDP printing for various card stocks based on surface texture and cleanliness.
Explains how to perform a tape adhesion test to evaluate HDP film transfer quality.
Instructions on how to open the Toolbox window to access various printer configuration tabs.
Details how to select printer features, monitor events, and set the LCD display language.
Guides on adjusting internal printer settings customized at the factory, including restoring defaults.
Lists the necessary cleaning supplies, such as printhead cleaning swabs and cleaning cards.
Procedure for cleaning rollers to maintain print quality and prevent jams.
Instructions for cleaning the printhead to ensure consistent print quality, especially after ribbon changes.
Explains how to access the Diagnostics function within the Fargo Workbench utility via the Card tab.
Guides on using the Workbench utility to configure fluorescent panel data for security features.
Explains how to create fluorescent images using application software and text string commands.
Describes generating an Inhibit Panel layout using the Fargo Workbench Printer Utility.
Explains how print jobs are rendered and how inhibit areas affect the print output.
Provides information to help resolve issues encountered when using the inhibit panel functionality.
Instructions for cleaning and packing the card printer for transport, including module handling.
Guides on downloading and installing new firmware versions from the HID Global website.
Provides contact information for Fargo Technical Support via phone and web.
Instructions on how to read the printer's serial number to determine its manufacturing date.
Defines technical terms used throughout the manual for better understanding.
General| Print Resolution | 300 dpi |
|---|---|
| Interface | USB |
| Print Technology | Dye sublimation |
| Card Capacity | 100-card input hopper |
| Connectivity | USB 2.0 |
| Print Capability | Single-sided |
| Operating System Support | Windows 7, 8, 10 |
| Card Sizes | CR80 (standard credit card size) |
