Hioki 3196 - Page 94

6.2 Time Plot Settings
88
Setting the number of repeated recording
RECORDING
RepeatSave
Select from pull-
down menu
Confirm
Cancel
Increases the value
Lowers the value
1 to 99
99
When the repeated recording function is set, the number o
f
repeated recording operations currently set will be indicated.
(Example)
When number of repeated recording operations is set to “99”
PC card
BINARY
data file
Auto-setting
Stop time
End measuring
[
SETTING] [WAITING] [RECORDING]
[ANALYZING]
Start time
Start measuring
PC card
BINARY
data file
[
SETTING]
Auto-setting
Start time
Start measuring
PC card
BINARY
data file
[
SETTING]
[WAITING]
[WAITING]
[ANALYZING]
[ANALYZING]
Auto-setting
Stop time
End measuring
Auto-setting
Stop time
End measuring
Auto-setting
Start time
Start measuring
(example)
Indicates required PC card
file capacity.
1/99
[RECORDING]
2/99
[RECORDING]
99/99
To set the start time, enter the start time of the first recording opera
-
tion in repeated recording. The start and end times of subsequen
t
repeated recording operations are then set automatically.
Note that each repeated recording operation results in a measurin
g
deviation of one minute.