84
_____________________________________________________________________________________________
4.4 Trigger Functions
______________________________________________________________________________________________
1V
-1V
T
Window-out Trigger / Upper limit: 1 V, Lower limit: -1 V
Setting the Trigger Filter
4. Next, move to the "
Filter
" setting.
OFF : Does not use a trigger
filter.
0.1 to 10.0 DIV: Uses a trigger filter with
the width of the set
number of DIV.
(Setting Example)
To activate a trigger when a waveform (as shown in the figure below)
deviates from the shaded area, set the conditions as follows:
To Next Page
Loading...
