111
_____________________________________________________________________________________________
5.3 Creating Comparison Area
______________________________________________________________________________________________
Screen image before deletion
Screen image after deletion
Screen image after deletion with a range specified
4. CLEAR: Delete the area you are working on
Deletes the entire area you are working on.
The "
BOX set
" command can be used for partial area deletion.
Drawing Procedure
1. Use the
CURSOR
key to select "
CLEAR
"
command, and press the
ENTER
key.
Then the area is deleted.
Executing "
CLEAR
" with a range
specified only deletes the specified range
of the area.
To Next Page
Loading...
