Hioki 8730-10 - Page 144

128
_____________________________________________________________________________________________
5.5 Value Comparison Details
______________________________________________________________________________________________
Average Minimum Rise-Time Pulse Width
RMS Min-Time Fall-Time DUTY
Peak-Peak Period Area Level Time
Maximum Frequency Integration Pulse Count
Max-Time XY-Area Difference MAX & MIN
AVE =
n
di
Σ
i=1
1
n
RMS =
di
2
n
i=1
1
n
Σ
ピーク値
最大値
最小値
Max.
Min.
Peak
最大値
Max.
Listed below are the types of calculation available for value comparison.
(1) OFF
No calculations are made.
(2) Average
Obtains the average [V] of waveform data.
<Formula>
AVE: Averaging value
n: Source number of data
di: "i"th data of the channel
(3) RMS
Obtains the RMS[V] of waveform data.
When scaling is ON, calculation is made
after the waveform data is scaled.
<Formula>
RMS: RMS
n: Source number of data
di: "i"th data of the channel
(4) Peak-Peak
Obtains the peak-to-peak value
(Max. - Min.) [V] of waveform data.
(5) Maximum
Obtains the maximum value [V]
of waveform data.