Hioki RM3545 - Page 166

8.3 Multiplexer Settings
158
4
Set the measurement speed.
5
Set the measurement range.
When auto-ranging is selected, the comparator settings cannot be set to on. To use
the comparator, set the measurement range first.
1
Set the measurement
speed to FAST.
Set the measurement
speed to MEDIUM.
Set the measurement
speed to SLOW1.
Set the measurement
speed to SLOW2.
Move to the SPD (SPEED)
parameter.
2
Move to the RANGE
parameter.
1
2
Set to auto-ranging.
Select the range you
wish to use.