Honeywell MX7 Tecton Reference Manual

Message Explanation and/or corrective action Level
Could not create event
EVT_HOTKEYCHG
The keyboard filter uses this event at the Administrator Control panel. The event could not be created. LOG_ERROR
Could not hook keyboard
If the keyboard cannot be controlled, AppLock cannot process the hotkey. This failure prevents a mode switch
into user mode.
LOG_ERROR
Could not start thread Hot-
KeyMon
The keyboard filter must watch for hot key changes. The watch process could not be initiated. LOG_ERROR
Ctrl after L or X Processing the backdoor entry. LOG_EX
Ctrl pressed The Ctrl key has been pressed and trapped by the HotKey processing. LOG_EX
Ctrl Processing the hotkey and backdoor entry. LOG_EX
Decrypt acquire context
failure
Unable to decrypt password. LOG_ERROR
Decrypt acquired context
OK
Decryption process ok. LOG_EX
Decrypt create hash fail-
ure
Unable to decrypt password. LOG_ERROR
Decrypt created hash OK Decryption process ok. LOG_EX
Decrypt failure Unable to decrypt password. LOG_ERROR
Decrypt import key failure Unable to decrypt password. LOG_ERROR
Decrypt imported key OK Decryption process ok. LOG_EX
Encrypt acquire context
failure
Unable to encrypt password. LOG_ERROR
Encrypt acquire encrypt
context failure
Unable to encrypt password. LOG_ERROR
Encrypt acquired encrypt
context OK
Encrypt password process successful. LOG_EX
Encrypt create hash fail-
ure
Unable to encrypt password. LOG_ERROR
Encrypt create key failure Unable to encrypt password. LOG_ERROR
Encrypt created encrypt
hash OK
Encrypt password process successful. LOG_EX
Encrypt export key failure Unable to encrypt password. LOG_ERROR
Encrypt export key length
failure
Unable to encrypt password. LOG_ERROR
Encrypt exported key OK Encrypt password process successful. LOG_EX
Encrypt failure The password encryption failed. LOG_ERROR
Encrypt gen key failure Unable to encrypt password. LOG_ERROR
Encrypt generate key fail-
ure
Unable to encrypt password. LOG_ERROR
Encrypt get user key fail-
ure
Unable to encrypt password. LOG_ERROR
Encrypt get user key ok Encrypt password process successful. LOG_EX
Encrypt hash data failure Unable to encrypt password. LOG_ERROR
Encrypt hash data from
pwd OK
Encrypt password process successful. LOG_EX
4-51

Honeywell MX7 Tecton Specifications

General

Display diagonal	3.5 \
Display resolution	240 x 320 pixels
Display number of colors	-
Internal memory	0.256 GB
Internal memory type	RAM
Compatible memory cards	SD
Maximum memory card size	4 GB
Processor family	PXA 320
Processor frequency	0.806 GHz
GPS (satellite)	No
Operating system installed	Windows CE 6.0
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.0+EDR
Headphone outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	5 - 100 %
Battery capacity	2200 mAh
AC adapter output current	7.4 A
Product color	Black, Blue
Keyboard layout	Alphanumeric
Linear (1D) barcodes supported	Codabar, Code 128, Code 39, Code 93, EAN-13, GS1-128 (UCC/EAN-128), PLANET, Plessey, Telepen, Trioptic, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Code 49, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code

Weight and Dimensions

Depth	50 mm
Width	86 mm
Height	223 mm
Weight	595 g