Honeywell SmartLine SLG 700 User Manual

Revision 8 SLG 700 SmartLine Level Transmitter User’s Manual Page 113
Loop Test
(HART only)
Note: Loop
must be
removed from
Automatic
Control
Set DAC Output
This selection allows you to force the DAC
output to any value between 3.8 and 20.8mA.
Note: This selection will put the DAC into
Fixed Output Mode.
Press  to enter menu
selection
Scroll to Set DAC
Normal
Press Enter to initiate
 and  to select
number.
 to enter and shift to
next digit
Set DAC Normal
This selection allows the loop to be returned
to its Normal mode (Automatic Control) after
performing the Trim operation.
Press  to enter menu
selection. Scroll to Set
DAC Normal
Press  to initiate
HART
Params
(HART only)
<Return>
Poll Address
##
0 (default) to 63
Press  to enter menu
selection.  and  to
select number.
 to enter and shift to
next digit
Final Assy Num
###
Asset tracking number
Show Date
Yes
No
If Yes selected HART Date
Options will be visible and
can be configurable
Year
# # # #
Enter the current year.
Month
January -
December
Select the current month.
Day
# #
Enter the day of the month.
Write Date
Press Enter to write the HART Date to the transmitter.

Honeywell SmartLine SLG 700 Specifications

General

Brand	Honeywell
Model	SmartLine SLG 700
Category	Transmitter
Language	English