HP 8360 L Series User Manual

Compliance with
This is to declare that this instrument is in conformance with the
German Noise
Requirements
German Regulation on Noise Declaration for Machines (Laermangabe
nach der Maschinenlaermrerordnung -3.GSGV Deutschland).
I
Acoustic Noise Emmission/Geraeuschemission
I
LpA <70 dB
Operator position
Normal position
per IS) 7779
LpA <70 dB
am Arbeitsplatz
normaler Betrieb
nach DIN 45635 t.19
Instrument Markings !
A
CC
“ISMl-A”
I
I
0
I
N
The instruction documentation symbol. The product is
marked with this symbol when it is necessary for the
user to refer to the instructions in the documentation.
The CE mark is a registered trademark of the European
Community.
The CSA mark is a registered trademark of the
Canadian Standards Association.
This is a symbol of an Industrial Scientific and Medical
Group 1 Class A product.
This is an ON symbol. The symbol ON is used to mark
the position of the instrument power line switch.
This is an ON symbol. The symbol ON is used to mark
the position of the instrument power line switch.
This is a STANDBY symbol. The STANDBY symbol is
used to mark the position of the instrument power line
switch.
This is an OFF symbol. The OFF symbol is used to
mark the position of the instrument power line switch.
This is an AC symbol. The AC symbol is used to
indicate the required nature of the line module input
power.
xi

HP 8360 L Series Specifications

General

Brand	HP
Model	8360 L Series
Category	Inverter
Language	English