Leveling
PointIntrnl
Menu Map
Description
Programming Codes
See Also
1
This softkey lets you set the swept CW generator to level at the
output of the directional coupler-located-inside the swept CW
generator. An asterisk next to the key label indicates that this
feature is active.
SCPI: POWer:ALC[:SOURce]
INTernal
Analyzer: Al
(ALC)
Leveling Point
Module
Function Group
ALC
Menu Map
1
Description
This softkey lets you set the swept CW generator to level at the
output of an HP 8355X series millimeter-wave source module. All
models of the HP 8360 L-Series swept CW generator drive mm-wave
source modules. High power models of HP 8360 drive the mm-wave
source modules directly and to specified power levels.
An HP 8349B power amplifier is needed in other configurations.
The source module interface multi-pin connector provides the
communication path between the swept CW generator and mm-wave
source module. An asterisk next to the key label indicates that this
feature is active.
Programming Codes
SCPI: POWer:ALC[:SOURce] MMHead
Analyzer: SHA2
See
Also
(ALC),
CONNECTORS
“Externally Leveling the Swept CW Generator” in Chapter 1
L-4 Operating and Programming Reference
To Next Page
Loading...
