HP 8360 L Series User Manual

Address
Function Group
SYSTEM
Menu Map 8
Description
The 8360 Adrs softkey lets you change the HP-IB address of the
swept CW generator. Enter the address desired using the numeric
entry keys or the up/down arrow keys. The address value may be
set between 0 and 30. The swept CW generator stores the address
value in non-volatile memory. The default address of the swept CW
generator is 19.
Programming Codes
SCPI: SYSTem:COMMunicate:GPIB:ADDRess
Analyzer: NONE
See Also
Connectors, HP-IB Menu
“Instrument Addresses” in Chapter 1
“Programming Typical Measurements” in Chapter 1
Adrs Menu
Function Group
SYSTEM
Menu Map 8
Description
This softkey accesses the HP-IB address menu.
Meter Adrs
Controls the system power meter address.
8360 Adrs
Can control the swept CW generator’s address,
depending on the setting of the rear panel HP-IB
switch.
Printer Adrs Controls the system printer address.
Operating and Programming Reference A-l

HP 8360 L Series Specifications

General

Brand	HP
Model	8360 L Series
Category	Inverter
Language	English