HP 8360 L Series User Manual

Fltness Menu
Fltness Menu
Function Group
POWER
Menu Map 5
Description
This softkey reveals the softkeys in the flatness correction menu that
control user-defined leveling parameters.
Auto Fill Incr
Auto Fill #Pts
Auto Fill Start
Auto Fill Stop
Clear Point
Copy List
CorPair Disable
Delete Menu
Enter Corr
Enter Freq
Freq Follow
Mtr Meas Menu
Automatically creates a frequency list with all
points separated by the specified increment in a
given frequency range.
Automatically creates a frequency list
containing the specified number of points in a
given frequency range.
Sets the start frequency of the flatness
correction array that will load automatically
when either the number of points or the
increment size is specified.
Sets the stop frequency of the flatness array
that will load automatically when either the
number of points or the increment size is
specified.
Changes the power correction value for the
indicated frequency point to the undefined state.
Copies the frequency list, (see List Menu ),
into the frequency parameter of the flatness
correction array.
Disables the frequency-correction pair array and
uses the HP-IB transferred 1601 point correction
set to apply correction information.
Reveals the delete softkeys.
Enables the entry of a power correction value
for a frequency point.
Enables the entry of a single frequency point
into the flatness correction array.
Sets the swept CW generator to CW frequency
mode so that the corresponding correction
values can be entered.
Reveals the softkeys in the power meter measure
correction menu.
Operating and Programming Reference F-5

HP 8360 L Series Specifications

General

Brand	HP
Model	8360 L Series
Category	Inverter
Language	English