Enter List Offset
Function Group
FREQUENCY
Menu Map
2
Description
This softkey lets you enter an offset value for a frequency in the
frequency list. A frequency point must be entered before a power
value can be accepted, otherwise the following error message appears:
ERROR: Must first enter
aList
Frequency.
The rotary knob and the up/down arrow keys let you scroll through
the frequency points available to change the default power values. An
asterisk next to the key label indicates that this feature is active.
Programming Codes
SCPI: NONE, see List Menu
Analyzer:NONE
See Also
List Menu
“Optimizing Swept CW Generator Performance” in Chapter I
ENTRY
KEYS
Function Group
NONE
Menu Map
NONE
Description
The entry keys consist of the numeric entry keys (0 through 9),
the decimal point key, the negative sign/backspace key, and the
terminator keys. These keys are active whenever the ENTRY
ON/OFF LED is lit.
See Also
ARROW KEYS, ROTARY KNOB
“Entry Area” in Chapter 1
E-4 Operating and Programming Reference
To Next Page
Loading...
Need help?
General
