ALC BW Menu
ALC Bandwidth Select Low
Sets the ALC bandwidth to the low
bandwidth position (10 kHz), and
to remain there for all sweep and
modulation conditions.
See Also
(ALC)
“Optimizing Swept CW Generator Performance” in Chapter 1
Altrnate Regs
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
This softkey causes the swept CW generator to alternate on
successive sweeps between the present instrument state and a second
instrument state stored in an internal register (1 to 8). Select
Altrnate Regs once to turn it on, a second time to turn it off. An
asterisk next to the key label indicates that this feature is active.
SCPI:
SYSTem:ALTernate:STATe
ONlOFFlllO
SYSTem:ALTernate
<num>JMAXimum~MINimum
Analyzer:
ALln,
where
n=
1 through 8 function on, AL0 function off
[RECALL),
EKE-)
“Saving and Recalling an Instrument State” in Chapter
1
A-12 Operating and Programming Reference
To Next Page
Loading...
