SOURce
The SOURce command selects the trigger source for an
event-detection state. Only one source can be specified at a time,
and all others are ignored. Sending
*RST
sets SOURce to
IMMediate.
The most commonly used sources are:
n
BUS
The event detector is satisfied by either Group Execute
Trigger(
<GET>)
or a
*TRG
command. <GET> is a low level
HP-IB message that can be sent using the TRIGGER command in
HP BASIC.
n
EXTernal
An external signal connector is selected as the source.
w
IMMediate
Qualified events are generated automatically. There is no waiting
for a qualified event.
Getting Started Programming
1-l
19
To Next Page
Loading...
