Ref Osc
Menu
10 MHz Freq Standard None
Sets the swept CW generator
to free-run operation, where no
frequency standard is used.
Programming Codes
SCPI:
ROSCillator:SOURce:INTernal(EXTernalJNONe
Analyzer: NONE
See Also
Softkeys listed above.
Function Group
Menu Map
Description
Programming Codes
See Also
POWER
NONE
This
hardkey
turns the RF power output on or off. Press
(WON/OFF).
If the yellow LED above the
hardkey
is off, power is off, and RF OFF
appears in the message line of the display. Press the key again to
turn on RF power and restore the power value last entered.
SCPI: POWer:STATe
ONlOFFlllO
Analyzer: RF1 power on, RF0 power off.
(MOD), [POWER LEVEL)
ROTARY
KNOB
Function Group
Menu Map
Description
Programming Codes
See Also
ENTRY
NONE
The rotary knob is active whenever the entry area is on. It controls
a rotary pulse generator that allows analog-type adjustment of the
active entry area. Although the rotary knob has the feel of analog
control, it is actually a digital control that generates 120 pulses per
revolution.
NONE
ARROW KEYS, ENTRY KEYS
“Entry Area” in Chapter 1
R-2 Operating and Programming Reference
To Next Page
Loading...
Need help?
General
