Dwell Coupled
Dwell Coupled
Function Group
FREQUENCY
Menu Map
2
Description
This
softkey
lets you couple the dwell time for points in the stepped
frequency sweep mode to the ramp sweep mode sweep time. The
equation to determine the dwell time in the dwell coupled mode is as
follows:
Coupled Dwell Time = (sweep time)
+
(number of step points)
An asterisk next to the key label indicates that this feature is active.
+DWELl:AUTO
ONI
1
Programming Codes
SCPI: SWEep[:FREQuency
Analyzer: NONE
See Also
Step
Sup
Menu
Operating and Programming Reference D-9
To Next Page
Loading...
