HP 8360 L Series User Manual

ALC 3W Menu
ALC Bandwidth
Select Low
Function Group
Menu Map
Description
Programming Codes
See Also
ALC
This softkey sets the swept CW generator to the ALC low bandwidth
position (10 kHz).
In this mode, the ALC bandwidth operates in a narrow bandwidth
for all sweep and modulation conditions. An asterisk next to the key
label indicates that this feature is active.
SCPI: Sending the swept CW generator an ALC bandwidth
frequency value of 510 kHz causes it to select the low ALC
bandwidth mode.
POWer:ALC:BANDwidth:AUTO OFF10
POWer:ALC:BANDwidth <freq>[freq suffix] or
MAXimum 1 MINimum
Analyzer: NONE
LALC),
ALC BW Menu
“Optimizing Swept CW Generator Performance” in Chapter 1
ALC BW Menu
Function Group
ALC
Menu Map 1
Description
This softkey reveals the softkeys of the ALC bandwidth select menu.
ALC Bandwidth Select Auto
Sets the ALC bandwidth to be
automatically chosen by the swept
CW generator, depending on the
current sweep and modulation
conditions.
ALC Bandwidth Select High
Sets the ALC bandwidth to the
high bandwidth position (100 kHz),
and to remain there for all sweep
and modulation conditions.
Operating and Programming Reference
A-l 1

HP 8360 L Series Specifications

General

Brand	HP
Model	8360 L Series
Category	Inverter
Language	English