HP 8360 L Series - (Recall); Ref Osc Menu

R
(RECALL)
Function Group
SYSTEM
Menu Map 8
Description
This hardkey retrieves a front panel setting that was previously
stored in a SAVE register (1 through 8).
Programming Codes
SCPI: *RCL <num>
The above is an IEEE 488.2 common command.
Analyzer: RCn, where n= a numeric value from 0 to 9.
See Also
[SAVE), SCPI COMMAND SUMMARY
“Saving and Recalling an Instrument State” in Chapter 1
“Programming Typical Measurements” in Chapter 1
Ref Osc Menu
Function Group
SYSTEM
Menu Map 8
Description
This softkey reveals the softkeys in the frequency standard menu.
IO MHz Freq Standard Auto
Automatically selects the frequency
standard to be used by the swept
CW generator.
IO MHz Freq Standard Extrnl Sets the swept CW generator
to accept an external frequency
standard as its reference.
10 MHz Freq Standard Intrnl Sets the swept CW generator to use
its internal frequency standard as
its reference.
Operating and Programming Reference R-l