Auto Fill Start
Function Group
FREQUENCY, POWER
Menu Map
2,s
Description
This softkey is used in two locations:
Fitness
Menu and
List Menu. The operation is the same in both applications.
This
softkey
enables the entry of a start frequency used to determine
the beginning frequency of the automatic filling array. The array is
not created until either the increment value or the number of points
is assigned. The auto fill start frequency does not affect the swept
CW generator start frequency. When Auto Fill Start is selected,
the active entry area indicates:
-->
Fill Start: XXXXXXXXX MHz
where X represents a numeric value. Unless a previous entry was
made, the display indicates the swept CW generator minimum
frequency.
Programming Codes
SCPI: NONE, see
Fitness
Menu or List Menu
Analyzer: NONE
See Also
Fltness Menu, List Menu
“Optimizing Swept CW Generator Performance” in Chapter 1
A-20 Operating and Programming Reference