List Menu
Function Group
FREQUENCY
Menu Map
2
Description
This softkey allows access to the frequency list functions.
Auto Fill
Incr
Automatically creates a frequency list using the
user-specified increment value.
Auto Fill
XPts
Automatically creates a frequency list
containing a user-specified number of points.
Auto Fill Start
Allows the entry of a start frequency for the
frequency list.
Auto Fill Stop
Allows the entry of a stop frequency for the
frequency list.
Delete Menu
Reveals the frequency list delete menu.
Enter
List
Dwell
Allows the entry of a dwell time for a frequency
point in the frequency list.
Enter List Freq
Allows the entry of a frequency point into the
frequency list.
Enter List Power Allows the entry of an ALC output power
correction value for a frequency in the frequency
list.
Global Dwell
Automatically sets the dwell time for all points
in the frequency list to a user-specified value.
Global Offset
Automatically sets the ALC output power
correction value for all points in the frequency
list to a user-specified value.
Pt Trig Menu
Reveals the frequency list in the point trigger
menu.
A frequency list consists of two or more frequency points. A
frequency point can be any frequency value within the specified
frequency range of the swept CW generator and must be entered
before a value for either ALC output power offset or dwell time is
accepted. The maximum number of frequency points in a frequency
list is 801.
Creating a Frequency List
There are two methods of constructing a frequency list:
1. Use the Enter List Freq
softkey
to begin entering frequency
points. The list will be generated in the order the values are
entered.
L-6 Operating and Programming Reference
To Next Page
Loading...
