HP P2000 G3 MSA System CLI Reference Guide 193
Partner Notify
Shows whether the partner controller will be notified when a trigger condition occurs.
• Disabled: Notification is disabled; the partner controller will continue using its current caching
mode. This is the default.
• Enabled: Notification is enabled; the partner controller will change to write-through mode for
better data protection.
Auto Write Back
Shows whether the cache mode will change from write-through to write-back when the trigger
condition is cleared.
• Disabled: Auto-write-back is disabled.
• Enabled: Auto-write-back is enabled. This is the default.
Drive Spin Down Non-Vdisk Enable
Shows whether available disks and global spares will spin down after a period of inactivity shown
by the Drive Spin Down Non-Vdisk Delay field.
• Disabled: Drive spin down for available disks and global spares is disabled. This is the default.
• Enabled: Drive spin down for available disks and global spares is enabled.
Drive Spin Down Non-Vdisk Delay
Shows the period of inactivity in minutes after which available disks and global spares will spin
down, from 1–360 minutes. The default is 15 minutes. The value 0 means spin down is disabled.
Disk Background Scrub
Shows whether disks that are not in vdisks are automatically checked for disk defects to ensure
system health. The interval between background disk scrub finishing and starting again is 72 hours.
• Disabled: Background disk scrub is disabled. This is the default.
• Enabled: Background disk scrub is enabled.
Managed Logs
Shows whether the managed logs feature is enabled, which allows log files to be transferred from
the storage system to a log collection system to avoid losing diagnostic data as logs fill.
• Disabled: The managed logs feature is disabled. This is the default.
• Enabled: The managed logs feature is enabled.
To Next Page
Loading...
Need help?
General
