HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 377
res2 string Shows whether internal debug messages are enabled for inclusion in the
Storage Controller debug log.
• Off: Disabled. This is the default.
• On: Enabled.
res2-numeric string Numeric equivalents for res2 values.
• 0: Off
• 1: On
capi2 string Shows whether Internal Configuration API tracing messages are enabled for
inclusion in the Storage Controller debug log.
• Off: Disabled. This is the default.
• On: Enabled.
capi2-numeric string Numeric equivalents for capi2 values.
• 0: Off
• 1: On
dms string Shows whether Snapshot feature debug messages are enabled for inclusion in
the Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
dms-numeric string Numeric equivalents for dms values.
• 0: Off
• 1: On
fruid string Shows whether FRU ID debug messages are enabled for inclusion in the Storage
Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
fruid-numeric string Numeric equivalents for fruid values.
• 0: Off
• 1: On
resmgr string Shows whether Reservation Manager debug messages are enabled for inclusion
in the Storage Controller debug log.
• Off: Disabled. This is the default.
• On: Enabled.
resmgr-numeric string Numeric equivalents for resmgr values.
• 0: Off
• 1: On
init string Not used.
init-numeric string Not used.
ps string Not used.
ps-numeric string Not used.
hb string Not used.
hb-numeric string Not used.
Table 21 debug-log-parameters properties (continued)
Name Type Description

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures