HP P2000 G3 Cli Reference Guide

376 XML API basetype properties
cache string Shows whether cache debug messages are enabled for inclusion in the Storage
Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
cache-numeric string Numeric equivalents for cache values.
• 0: Off
• 1: On
emp string Shows whether Enclosure Management Processor debug messages are enabled
for inclusion in the Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
emp-numeric string Numeric equivalents for emp values.
• 0: Off
• 1: On
capi string Shows whether Internal Configuration API debug messages are enabled for
inclusion in the Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
capi-numeric string Numeric equivalents for capi values.
• 0: Off
• 1: On
mui string Shows whether internal service interface debug messages are enabled for
inclusion in the Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
mui-numeric string Numeric equivalents for mui values.
• 0: Off
• 1: On
bkcfg string Shows whether internal configuration debug messages are enabled for inclusion
in the Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
bkcfg-numeric string Numeric equivalents for bkcfg values.
• 0: Off
• 1: On
awt string Shows whether debug messages for auto-write-through cache triggers are
enabled for inclusion in the Storage Controller debug log.
• Off: Disabled. This is the default.
• On: Enabled.
awt-numeric string Numeric equivalents for awt values.
• 0: Off
• 1: On
Table 21 debug-log-parameters properties (continued)
Name Type Description

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures