HP P2000 G3 Cli Reference Guide

502 XML API basetype properties
cache-read-
ahead
blocks Not used.
cache-read-
ahead-numeric
string Not used.
cache-flush-
period
uint32 Not used.
read-ahead-
enabled
string Not used.
read-ahead-
enabled-numeric
string Not used.
write-back-
enabled
string Not used.
write-back-
enabled-numeric
string Not used.
number-of-reads uint32 Number of read operations since these statistics were last reset or since the
controller was restarted.
number-of-
writes
uint32 Number of write operations since these statistics were last reset or since the
controller was restarted.
total-sectors-
read
uint32 Total sectors read.
total-sectors-
written
uint32 Total sectors written.
job-running string Same as current-job.
current-job string Job running on the vdisk, if any.
• (blank): No job is running.
• DRSC: The disk is being scrubbed.
• EXPD: The vdisk is being expanded.
• INIT: The vdisk is initializing.
• RCON: The vdisk is being reconstructed.
• VRFY: The vdisk is being verified.
• VRSC: The vdisk is being scrubbed.
current-job-
numeric
string Numeric equivalents for current-job values.
• 0: (blank)
• 2: INIT
• 3: RCON
• 4: VRFY
• 5: EXPD
• 6: VRSC
• 7: DRSC
current-job-
completion
string • 0%–99%: Percent complete of running job.
•
(blank): No job is running (job has completed).
target-id uint32 Not used.
num-array-
partitions
uint32 Number of volumes in the vdisk.
largest-free-
partition-space
string The largest contiguous space in which a volume can be created. The value is
formatted to use the current base, precision, and units.
Table 90 virtual-disks properties (continued)
Name Type Description

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures