HP P2000 G3

504 XML API basetype properties
Example
# show vdisks
...
<OBJECT basetype="virtual-disks" name="virtual-disk" oid="1" format="rows">
<PROPERTY name="name" type="string">vd01</PROPERTY>
<PROPERTY name="size" units="GB" type="string">1198.7GB</PROPERTY>
<PROPERTY name="size-numeric" units="blocks512" type="string">2341275136</PROPERTY>
<PROPERTY name="freespace" units="GB" type="string">1027.3GB</PROPERTY>
<PROPERTY name="freespace-numeric" units="blocks512" type="string">2006570880
</PROPERTY>
<PROPERTY name="owner" type="string">B</PROPERTY>
<PROPERTY name="owner-numeric" type="string">0</PROPERTY>
<PROPERTY name="preferred-owner" type="string">B</PROPERTY>
<PROPERTY name="preferred-owner-numeric" type="string">0</PROPERTY>
<PROPERTY name="raidtype" type="string">RAID5</PROPERTY>
<PROPERTY name="raidtype-numeric" type="string">5</PROPERTY>
<PROPERTY name="diskcount" type="uint16">5</PROPERTY>
<PROPERTY name="sparecount" type="uint16">0</PROPERTY>
<PROPERTY name="chunksize" type="string">64k</PROPERTY>
<PROPERTY name="status" type="string">FTOL</PROPERTY>
<PROPERTY name="status-numeric" type="string">0</PROPERTY>
<PROPERTY name="lun" type="uint32">-1</PROPERTY>
<PROPERTY name="min-drive-size" units="GB" type="string">299.6GB</PROPERTY>
<PROPERTY name="min-drive-size-numeric" units="blocks512" type="string">585318784
</PROPERTY>
<PROPERTY name="create-date" type="string">2011-10-11 16:19:39</PROPERTY>
<PROPERTY name="create-date-numeric" type="string">1318349979</PROPERTY>
<PROPERTY name="cache-read-ahead" units="GB" type="string">2199.0GB</PROPERTY>
<PROPERTY name="cache-read-ahead-numeric" units="blocks512" type="string">4294967295
</PROPERTY>
<PROPERTY name="cache-flush-period" type="uint32">-1</PROPERTY>
<PROPERTY name="read-ahead-enabled" type="string">Enabled</PROPERTY>
<PROPERTY name="read-ahead-enabled-numeric" type="string">1</PROPERTY>
<PROPERTY name="write-back-enabled" type="string">Disabled</PROPERTY>
<PROPERTY name="write-back-enabled-numeric" type="string">0</PROPERTY>
<PROPERTY name="number-of-reads" type="uint32">0</PROPERTY>
<PROPERTY name="number-of-writes" type="uint32">0</PROPERTY>
total-data-
transferred-
numeric
uint64 Unformatted total-data-transferred value.
total-bytes-
per-sec
bytes Data transfer rate, in bytes per second, since the last sampling time.
total-bytes-
per-sec-numeric
uint64 Unformatted total-bytes-per-second value.
health string • OK
• Degraded
• Fault
• Unknown
health-numeric string Numeric equivalents for health values.
• 0: OK
• 1: Degraded
• 2: Fault
• 3: Unknown
health-reason string If Health is not OK, the reason for the health state.
health-
recommendation
string If Health is not OK, the recommended actions to take to resolve the health issue.
Table 90 virtual-disks properties (continued)
Name Type Description