HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 65
level monitor|manage
Optional.
• monitor: User can view but not change system settings. This is the default.
• manage: User can view and change system settings.
locale English|en|Spanish|es|French|fr|German|de|Italian|it|Japanese|ja
|Korean|ko|Dutch|nl|Chinese-simplified|zh-s|Chinese-traditional|zh-t
Optional. The display language. The default is English.
password password
Optional in console format; required for XML API format. Sets a new password for the user. If this
parameter is omitted, the command prompts you to enter and re-enter a value, which is displayed
obscured for security reasons. For an SNMPv3 user whose authentication-type parameter is set to use
authentication, this specifies the authentication password. For user password rules, type help
syntax.
precision #
Optional. Sets the number of decimal places (1–10) for display of storage-space sizes. Default is 1.
privacy-password encryption-password
Optional. For an SNMPv3 user whose privacy-type parameter is set to use encryption, this
specifies the encryption password. For user password rules, type help syntax.
privacy-type DES|AES|none
Optional. For an SNMPv3 user, this specifies whether to use a security encryption protocol. This
parameter requires the privacy-password parameter and the authentication-type
parameter.
• DES: Data Encryption Standard.
• AES: Advanced Encryption Standard.
• none: No encryption. This is the default.
storage-size-base 2|10
Optional. Alias for base.
storage-size-precision #
Optional. Alias for precision.
storage-size-units auto|MB|GB|TB
Optional. Alias for units.
temperature-scale celsius|c|fahrenheit|f
Optional. Sets the scale for display of temperature values:
• fahrenheit or f: Temperatures are shown in degrees Fahrenheit.
• celsius or c: Temperatures are shown in degrees Celsius. This is the default.
timeout #
Optional. Sets the timeout value in seconds for the login session. Valid values are 120–43200
seconds (2–720 minutes). The default is 1800 seconds (30 minutes).
trap-host IP-address
Optional. For an SNMPv3 user whose interface parameter is set to snmptarget, this specifies
the IP address of the host that will receive SNMP traps.
type novice|standard|advanced|diagnostic
Optional. Identifies the user’s experience level. The default is standard.

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures