Tab Parameter Description
Humidifying function ● Enable: The device starts
humidifying when the ambient
humidity is lower than the humidity
setpoint.
● Enabled when active power supply
is working: The device starts
humidifying only when the active
power supply is used and the
ambient humidity is lower than the
humidity setpoint by a certain
range.
● Disable: The humidifying function is
disabled.
Dehumidifying
function
● Enable: The device starts
dehumidifying when the ambient
humidity is higher than the
humidity setpoint.
● Disable: The dehumidifying function
is disabled.
DO_1 action This parameter can be set to On or
O, and is used together with DO_1.
For details, see DO_1 description.
DO_2 action This parameter can be set to On or
O, and is used together with DO_2.
For details, see DO_2 description.
NetCol8000-A(045, 055, 060, 090, 120) In-room Air
Cooled Smart Cooling Product
User Manual 6 Power-On Commissioning
Issue 05 (2020-10-10) Copyright © Huawei Technologies Co., Ltd. 174
To Next Page
Loading...
