Figure 14-10 IRC of the server
----End
Mac OS
Supported OS: Mac OS X El Capitan
Step 1 Configure an IP address for the client (PC) to enable communication between the client and
the iBMC.
The IP address configured and the iBMC management network port IP address must be on the
same network segment.
Step 2 Open the console and set the folder where the IRC is stored as the working folder.
Step 3 Run the chmod 777 KVM.sh command to set the permission for the IRC.
Step 4 Run ./KVM.sh to start the IRC.
A dialog box similar to the one shown in Figure 14-11 is displayed.
TaiShan 2280 V2 Server
User Guide
14 Common Operations
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 155
To Next Page
Loading...
