Figure 4-26 Security
Step 2 Select SET Supervisor Password and press Enter, and set the administrator password.
Before setting the password, you must enter the current administrator password.
NOTE
l The administrator password must meet the following requirements:
– Contains 8 to 16 characters.
– Contains special characters (including spaces) and at least two types of the following
characters: uppercase letters, lowercase letters, and digits.
– Cannot be the same as any of the previous five passwords.
l The default password is Admin@9000.
Step 3 (Optional) After a password is set, select Clear Supervisor Password to delete the password.
Step 4 Press F10.
The Save Configuration&Exit dialog box is displayed.
Step 5 Select Yes and press Enter.
----End
4.6.9 Installing an OS
The server is compatible with different types of OSs. Use the Intelligent Computing
Compatibility Checker to check compatible OSs.
The installation method varies according to the OS type. For details, see the installation guide
of each OS.
TaiShan 2280 V2 Server
User Guide
4 Setup
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 82
To Next Page
Loading...
