Huawei TaiShan 2280 V2 - Removing the Air Duct

NOTE
Fan modules on the same server must have the same BOM number.
Figure 3-12 Installing a fan module
Step 8 Install the chassis cover. For details, see 3.7-Installing the Chassis Cover.
Step 9 Install the server. For details, see 4.4-Installing the Server on Guide Rails.
Step 10 Connect the power cables. For details, see 3.5 Connecting Cables to a PSU.
Step 11 Power on the server. For details, see 3.1 Powering On the Server
Step 12 Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the TaiShan Rack Server iBMC User Guide.
----End
3.10 Removing the Air Duct
Step 1 Wear an ESD wrist strap. For details, see 12 Preventing Electrostatic Discharge.
Step 2 Power off the server. For details, see 3.2 Powering Off the Server.
Step 3 Remove the power cables. For details, see 3.4 Removing Cables from a PSU.
TaiShan 2280 V2 Server
User Guide
3 Basic Operations
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 40