Step 4 Remove the server. For details, see 3.3 Removing the Server and Guide Rails.
Step 5 Remove the chassis cover. For details, see 3.6-Removing the Chassis Cover.
Step 6 If the server is configured with a full-height full-length riser card tray, remove it. For details,
see 3.12 Removing a Riser Card Tray.
Step 7 If the server is configured with a supercapacitor, disconnect the supercapacitor from the
RAID. See Figure 3-13.
Figure 3-13 Removing the supercapacitor cable
Step 8 Lift the air duct according to the signs on the air duct. See Figure 3-14.
TaiShan 2280 V2 Server
User Guide
3 Basic Operations
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 41
To Next Page
Loading...
