Figure 14-15 PuTTY Configuration - Session
Step 6 Set Close window on exit to Only on clean exit, as shown in Figure 14-15.
Set Saved Sessions and click Save. Next time you can simply double-click the saved settings
under Saved Sessions to log in to the server.
Step 7 Click Open.
The PuTTY window is displayed.
Step 8 Enter the user name and password.
If the login is successful, the server host name is displayed on the left of the prompt.
----End
14.5 Logging In to the Server over a Network Port Using
PuTTY
The login method described in this chapter applies to components that support SSH access,
for example, iBMC and OS.
Use PuTTY to remotely log in to the server over a local area network (LAN) and configure
and maintain the server.
TaiShan 2280 V2 Server
User Guide
14 Common Operations
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 159
To Next Page
Loading...
